• Hp Elitepad 1000 G2 Pc For Mac

Hi folks, hope u can help me out. On my elitepad appears an error after i updated my Bios. I got the same issue last year on my Pavillion. This pops up when i start my elitepad: Product Information not valid The following product information programmed into the system board is missing or invalid. System Board (00A) - Product Name System Board (00A) - Product Serial Number System Board (00A) - Product Number System Board (00A) - System Board CT Number EINGABETASTE - Systemstart fortsetzen Fore more information, please visit On my Pavillion i used successfull BCU to change the missing information into the Bios system, unfortunetly this isnt working on my elitepad.

If i try to get the config its says that my sytem not supported??? BiosConfigUtility.exe /getconfig:new.txt ERROR msg:'System not supported. Unable to connect to HP WMI namespace: 'root HP' ERROR msg:'BCU return value' real='23' translated='23' / have tried several versions of BCU, but there is always the same error. Wmi I also restarted, nothing. Also i tried to create with rufus a freedos USB, but it wont start from USB. I'm very disappointed with HP.

Best regards Vlad. Hello @vladpetz, thank you for your post and much appreciation to @2300peterw for his valuable assistance and tag. See also below the input from the consultant. Keep us updated. ##### What is the product number of your tablet?

HP Notebook System BIOS Update, ver. 01.41 Rev.A, Apr 17, 2017 BiosConfigUtility.exe /getconfig:new.txt ERROR msg:'System not supported. Unable to connect to HP WMI namespace: 'root HP' ERROR msg:'BCU return value' real='23' translated='23' / Page 6: ' Error code 23: Unable to connect to HP BIOS WMI namespace System not supported.

Unable to connect to HP BIOS WMI namespace: root HP InstrumentedBIOS. See Q: The BIOS Configuration Utility (BCU) is an HP utility, so why it does not work on some HP platforms? For additional information. Q: The BIOS Configuration Utility (BCU) is an HP utility, so why it does not work on some HP platforms? A: BCU is a command-line utility for controlling various BIOS settings on a supported HP notebook, desktop, or workstation system. It requires a BIOS that supports HP WMI Namespace within the BIOS. HP began integrating CMI/WMI support directly into the BIOS during approximately 2006–2008 for managed business systems, which did not include consumer-based systems or entry-level units.

If the system BIOS does not have the required WMI support, BCU does not work. This is not a failure of BCU. It is a limitation of the system BIOS that does include WMI support in the BIOS code.' Okay i tried to unlock the MPM, copied SMC.bat to a formatted FAT32 USB Stick and hold WINODOWS Arrow up and down but the system gave me a SMC COMMAND FAILURE.

I tried to create a bootable usb-stick with rufus and copied all files from HPDU folder on it. Tried to boot, but it doesnt recognize the usb stick. I also created a WinPE Stick and copied all the files from the nbdmifit folder into it.

As opposed to a usb-stick with DOS he recognizes strangely this usb-stick with winpe, however, If i start from the usb WinPE says that 'this uefi system is not supported' Im done with it, i will throw this hp crap to trash. Thank all for your Help. Regards Vlad.

Sorry to hear that nothing worked for you. You have done much to repair it.

I googled the SMC Command Failure and came across this which seems to have similar characteristics to your problem. The difference being is that there was eventual success. It may be worth a quick read before you give up. And also ' When trying to get into the BIOS of an HP ElitePad, you get this error: SMC command failure The SMC command failure occurs when a USB device, docking station or some other peripheral doesn’t play nicely with the HP ElitePad.

To work around this, unplug everything from the HP ElitePad adn try again.' ##### vladpetz wrote: 'I tried to create a bootable usb-stick with rufus and copied all files from HPDU folder on it. Tried to boot, but it doesnt recognize the usb stick.

I also created a WinPE Stick and copied all the files from the nbdmifit folder into it. As opposed to a usb-stick with DOS he recognizes strangely this usb-stick with winpe, however, If i start from the usb WinPE says that ' this uefi system is not supported'.'

Hp Elitepad 1000 G2 Pc For Mac

Of course booting from legacy device is not possible if you have secure boot UEFI enabled. Disable in BIOS secure boot, read instructions below. Then USB flash memory is recognized by the computer and you can boot from it. Disabling Secure Boot on older model notebook computers Disabling Secure Boot on recent model notebook computers #####.